![]() ![]() ![]() Enable MAC filtering and set it to "Allow Only" mode.As always, choose either AES or TKIP+AES as TKIP alone is not as secure. WPA2 is probably the most secure option available, but I've heard of the PS3 having issues with WPA2. Enable the highest level of wireless encryption supported by all wireless devices.Disable the broadcasting of your wireless network's SSID (network name).Disable DHCP on the PS3 and change the ip address to 192.168.10.30 with a subnet mask of 255.255.255.0. ![]() Disable DHCP on Media Server #2 and change the ip address to 192.168.10.20 with a subnet mask of 255.255.255.0.Disable DHCP on Media Server #1 and change the ip address to 192.168.10.10 with a subnet mask of 255.255.255.0.Change your router's default login password, and change the username if the router supports it.In case anything below messes up and doesn't work, you'll have a working configuration file handy that you can restore. Go to the Administration section of your router to get to the Configuration Management section.The following is how I do everything on my Linksys WRT54GS, so some of the terminology that D-Link uses might be different: I'm typing all of this from memory, so if there's something that I mis-typed, got wrong, or forgot to add, I apologize. Routers sometimes get hosed up and refuse new connections, and modems sometimes get hosed up and deny any access to the internet.Īffter successfully connecting to both the router and the internet, here's a quick and easy way to set everything up while keeping it fairly secure. That way the router drops all of the old tables and starts from scratch. If for some reason you can't connect to the router, or you can connect to the router but not to the internet, then your next step would be to power off router and your modem for at least 10 seconds. I usually tell people to assign everything on your network a static ip address as the DHCP server on a lot of home routers can be flaky at best, so using static IPs gives you one less thing to worry about to. If you can, then start from there and work your way up to see what the issue is. My advice is to completely open up your router (broadcast the SSID, DHCP enabled, no security/encryption, etc.) just to see if you can connect to the router and the internet. Also, I highly recommend that you use the Port Forwarding features on your router instead of using the DMZ option, as using the DMZ "exposes your router to the internet." Sikthskies, are you using wireless MAC filtering by any chance? What wireless encryption (WEP, WPA, WPA2, etc.) are you using, if at all? And as far as the PS3 getting online but not seeing any of the media servers, then my guess would be that it's not on the same network or subnet. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |